Oase Auto Fill Kit

Oase Auto Fill Kit The Oase Auto Fill Kit is a simple solution for automatically topping up a water feature reservoir or pond. Evaporation or splashing out, will cause the water level within your pond or water feature to lower over time. With the installation of a Auto Fill Kit which is connected to a mains water supply, small amounts of water can be added at a time reducing the need for manual top-ups. The Oase Auto Fill Kit uses a simple and reliable float valve which can be fitted to the flat surface of a plastic reservoir (through a 22mm diameter hole) and then connected to a mains water feed pipe. The Oase Auto Fill Kit Includes: A float valve with a range of 38 to 45 mm between the lowest and the highest level water points A "Snap", lock type hose connector A 12mm hosetail suitable for standard garden hose A 20mm solvent weld socket suitable for 20mm outside diameter rigid pipe Oase Auto Fill Kit Technical Limits Maximum water pressure : 5 bar (72 PSI) Maximum flowrate 340 litres per hour (75 gallons per hour)   Ensures a constant water level in ponds, reservoirs and pools Simple and effective Easy to install Complete with 21mm garden hose quick lock coupling Dimensions Float length from side of tank = 160mm (very small float ideal for inconspicuous fitting) Float diameter 38mm Hole size required in tank for fitting = 22mm Maximum fitting height above water level 45mm  Minimum fitting height above water level 38mm